Wood Crafts to Sell: 13 Easy Projects That Fly Off Holiday Market Tables

Wood crafts to sell are having a big moment, and holiday markets are the perfect place to prove it. Shoppers at craft fairs love anything that feels handmade, warm and a little rustic, and wood checks every box. The best part is that most of these projects start with scrap boards, fence pickets or a single 2×4, so your costs stay tiny while your table looks full and inviting. Popular sellers say the same simple pieces disappear every December, from painted ornaments to cutting boards. Below you will find 13 easy wood crafts to sell, each with a short supply list and three simple steps. Grab your safety glasses, clear a corner of the garage and let’s get building..

Wood Slice Ornaments Lead the Pack of Wood Crafts to Sell

Wood slice ornaments are the first thing shoppers reach for, so they deserve the front of your table. Cut thin rounds from a dry branch, sand both faces smooth and drill a small hole near the top. Paint simple trees, stars or snowflakes, then hang them on twine so they spin and catch the light. Sold one at a time or bundled in sets of three, these are classic wood crafts to sell because they are cheap to make, quick to finish and easy to gift. Keep a basket of blank ones ready for custom names too..

You will need: A dry branch about 3 inches wide, a hand saw or miter saw (with adult help), sandpaper, a small drill bit, acrylic paints, fine brushes, clear sealer, jute twine.

How to make it: 1. Cut slices about 1/4 inch thick and let them dry for a few days. 2. Sand, drill a hanging hole and paint your design. 3. Seal, thread twine and tie a loop.

Scrap Wood Christmas Trees for the Mantel

Those short boards leaning in the corner of the garage can become a forest of little mantel trees. Cut a simple triangle tree from scrap 2x4s or old fence boards, add a small block as a trunk and paint them in soft white, sage and natural stain. Sold as a trio in three heights, they look like something from a boutique. Woodworking creator WhosTheVoss shared how one small, repeatable project helped him build up his shop, and that video has passed 2 million views. Which colors would match your own mantel?

You will need: Scrap 2x4s or fence boards, a saw (adult help), wood glue, small square wood blocks, sandpaper, chalk paint in white and sage, wood stain, a rag.

How to make it: 1. Mark tall triangles in three heights and cut them out. 2. Glue each tree to a small trunk block and base. 3. Sand the edges, paint or stain, then distress lightly for a rustic look.

Cutting Boards With a Burned Initial Are Wood Crafts to Sell All Year

A smooth hardwood cutting board with one burned initial in the corner is one of those wood crafts to sell that works all year, not just in December. Buyers see a personal gift for a host, a newlywed couple or a friend who loves to cook. Glue up offcuts of maple, walnut or cherry, sand them flat and round the edges. A small monogram adds value without much extra time. Tie on a kraft tag with care tips and it is ready to gift. Who would you make the first one for?

You will need: Hardwood offcuts, wood glue, clamps, a sander and sandpaper, a wood burning pen with a letter stencil, food safe mineral oil, kraft tags.

How to make it: 1. Glue and clamp strips into a board and let it cure overnight. 2. Trim, sand smooth and round the corners. 3. Burn a small initial, then rub in food safe oil.

Reclaimed Pallet Porch Signs

Tall porch signs made from reclaimed pallet boards are a craft fair favorite because they make an instant statement by the front door. Take a pallet apart, pick the best boards and join them with two cleats on the back. Stain them warm brown and paint a simple white evergreen and a few snowflakes, or leave space for a family name. These signs are big, so they look like a lot of value for the price. Bring one fully styled so shoppers can picture it at home. Would you hang yours by the door or on a wall?

You will need: Heat treated pallet boards (look for the HT stamp), a pry bar, work gloves, two cleats, screws, a drill (adult help), wood stain, white paint, a tree stencil.

How to make it: 1. Carefully pry the boards apart and sand away splinters. 2. Line up four boards and screw two cleats across the back. 3. Stain, stencil the tree and snowflakes, then seal for outdoor use.

Wood Slice Coasters Make Easy Wood Crafts to Sell in Sets

Wood slice coasters are small, quick and almost impossible to resist, which makes them perfect impulse buys and great wood crafts to sell in sets of four. Cut rounds about half an inch thick, sand them well and seal the tops so mugs do not leave rings. You can carve or burn a simple pattern in the center, stain a few darker for contrast or leave the bark on for a natural look. Tie each set with twine and a tag. They are easy add-ons when someone is already buying a bigger piece. How many sets would you bring?

You will need: A dry log or branch about 4 inches wide, a saw (adult help), sandpaper, wood stain, a wood burning pen (optional), a clear water resistant sealer, felt pads, twine.

How to make it: 1. Cut even rounds about 1/2 inch thick and let them dry. 2. Sand both sides and add a burned or stained design. 3. Seal with several coats and stick felt pads on the bottom.

Rustic Key Holders for the Entryway

Everyone loses their keys, so a rustic key holder sells itself. A single piece of reclaimed barn wood, five sturdy hooks and a narrow ledge on top for a small plant or sunglasses are all it takes. Sand the board just enough to remove splinters but keep the weathered texture people love. Add sawtooth hangers on the back and you have a gift that is useful every single day. Offer a few lengths and hook finishes so buyers can choose. Where is the spot in your home where keys always disappear?

You will need: A reclaimed wood board, 4 or 5 metal hooks, a thin strip of wood for the ledge, wood glue, small screws, a drill (adult help), sawtooth hangers, sandpaper.

How to make it: 1. Cut the board to length and sand lightly. 2. Glue and screw the ledge along the top edge. 3. Space the hooks evenly, screw them in and add hangers to the back.

Tabletop Snowmen From 2×4 Offcuts

Little 2×4 snowmen are proof that the cheapest scraps can turn into the cutest wood crafts to sell. Cut 2×4 offcuts into three heights, paint them white and give each one dot eyes, a carrot nose and a smile. A strip of plaid flannel becomes a scarf, and a small block on a thin round becomes a top hat. Kids love them, grandparents love them, and they look adorable lined up on a shelf. Sell them as a family of three. What would you name your snowman family?

You will need: 2×4 offcuts, a saw (adult help), white, black and orange acrylic paint, a pencil eraser for dots, flannel fabric strips, small wood blocks, wood glue, mini pine sprigs.

How to make it: 1. Cut blocks 4, 5 and 6 inches tall and sand the edges. 2. Paint them white, then add faces with dots and a carrot nose. 3. Glue on a top hat, tie on a fabric scarf and tuck in a pine sprig.

Painted Picture Frames From Fence Boards

Picture frames are one of the easiest ways to turn old fence boards or trim scraps into something people happily pay for. Cut four pieces with simple butt joints or angled corners, glue and nail them together and add a back panel and turn clips. Paint them in bright happy colors like a wall of candy, or keep them weathered gray for a farmhouse buyer. Frames sell well as last minute gifts because people already know which photo they want to put inside. Which color would you pick for your favorite picture?

You will need: Old fence boards or wood trim, a saw or miter box (adult help), wood glue, small brad nails, a hammer, sandpaper, paint, thin hardboard backing, a clear acrylic sheet, turn clips.

How to make it: 1. Cut two long and two short sides and join the corners with glue and brads. 2. Sand and paint or distress the frame. 3. Cut the acrylic and backing to size and add turn clips.

Wooden Phone and Tablet Stands Are Smart Wood Crafts to Sell

A wooden phone and tablet stand is a modern twist that brings younger shoppers to your table, and it is one of the most practical wood crafts to sell. All you need is a thick block of hardwood with an angled slot cut across the top so a phone or tablet leans back at a comfortable angle. Sand it silky smooth and finish it with oil to make the grain glow. It is perfect for recipes in the kitchen or video calls with family. Make a few sizes to fit phones and bigger tablets. Who in your family is always propping a phone against a mug?

You will need: A hardwood block about 2 inches thick, a saw for the angled slot (adult help), sandpaper, wood oil or wax, small felt or rubber pads.

How to make it: 1. Cut the block to length and mark a slot at about 70 degrees. 2. Cut the slot slightly wider than a phone in its case. 3. Sand, oil and add pads underneath.

Charcuterie Paddles for Holiday Hosts

Charcuterie paddles are holiday party gold. Hosts want boards big enough for cheese, fruit and crackers and pretty enough to set straight on the table. Trace a paddle shape with a handle onto a wide hardwood board, cut it out and sand the edges soft. A hole in the handle lets buyers hang it as decor between parties. Display one with a sample spread so shoppers can picture it at their own gathering, and pair it with the cutting boards for a bundle price. What would you pile on yours first?

You will need: A wide hardwood board, a jigsaw (adult help), a drill for the hanging hole, sandpaper, food safe mineral oil and beeswax, a leather cord.

How to make it: 1. Draw a paddle and handle shape and cut it out. 2. Drill a hole in the handle and sand everything smooth. 3. Rub in food safe oil and thread a leather loop.

Simple Plant Stands and Risers

Plant lovers shop all year, so simple wooden plant stands keep your table busy after the holidays too. A small stool shape with an arched cutout in the sides looks modern and lifts a potted plant up where it gets more light. Build them from pine or poplar boards with glue and screws, then finish with a natural stain or soft white paint. Offer two heights so buyers can group them. Plant risers make a lovely gift for anyone with a windowsill full of green. Do you have a plant that needs a little lift?

You will need: Pine or poplar boards, a jigsaw (adult help), wood glue, screws, a drill, sandpaper, stain or paint, a bowl to trace the arch.

How to make it: 1. Cut a top and two side panels. 2. Trace and cut an arch at the bottom of each side. 3. Glue and screw the top to the sides, then sand and finish.

Mini Wooden Sleds for Holiday Shelves

Mini wooden sleds bring a sweet touch of nostalgia that reminds people of snow days as a kid. Cut thin slats for the seat, shape two curled runners from thicker wood and glue it all together. Paint a few red with white trim and leave a few natural, then tuck a bundle of evergreen and a pine cone on top. They look adorable on a shelf, under the tree or on a front porch. Sell them in small, medium and large to fill out your table. Did you have a favorite sled growing up?

You will need: Thin pine slats or craft sticks, thicker wood for runners, a coping saw or scroll saw (adult help), wood glue, red and white paint, mini evergreen picks, pine cones.

How to make it: 1. Cut two curved runners and three or four seat slats. 2. Glue the slats across the runners and add a cross bar. 3. Paint, then decorate with greenery and pine cones.

Lantern Boxes With Fairy Lights Round Out Your Wood Crafts to Sell

Finish your table with rustic lantern boxes that glow without any flame, a smart and safe choice among wood crafts to sell. Build a simple open frame from thin pine strips, add a solid base and fill it with a coil of warm white battery fairy lights and a few pine cones. Turn the lights on at your booth and watch people walk over. They look beautiful on a dining table or porch all winter. For more ideas that sell out fast, see our Christmas crafts to sell. Which room would you light up first?

You will need: Thin pine strips, a square plywood base, wood glue, small brads, sandpaper, stain, a battery fairy light string with a timer, pine cones.

How to make it: 1. Cut four corner posts plus top and bottom rails. 2. Glue and nail the frame to the base, then sand and stain. 3. Coil the fairy lights inside with pine cones and hide the battery box.